BusIO DC INPUT BOARD

BusIO DC INPUT BOARD
Item# MR-BusIO-DCIN
$4.99, 10/$44.91, 50/$199.60

Product Description:

BusIO DC INPUT BOARD
MR-BusIO-DCIN is an experiment board for receiving 5V, 12V or 24VDC input and translates into TTL 5VDC level. It is using PC817 Photo-coupler IC to isolate high current and low current. It is best for monitoring the present of DC voltage.

The board can be use with MR-BusIO-MAIN board or stand-alone. PCB size is 0.63 x 2.80

The PC817 require at least 5mA to drive input photo-coupler LED. It can take up to 6V in reverse bias. For an output (between collector and emitter), it can drive up to 35V with 50mA continuous current.

The operation of this board starts when its receiving input DC voltage from 2-PIN terminal block. The current will be limited around 9-10mA (enough to turn on PC817). The output of photo-coupler then pulls the I/O pin LOW then an indicator LED is illuminated. In case of user need to apply input voltage beyond 5V, 12V or 24V, the new current limited resistor can be calculate by I=V/R when I=9mA.

User must set the jumper to appropriate input voltage. This board can be use to detect DC voltage.

For more information please see: MR-BusIO-DCIN User Manual